BiliSoft PT

BiliSoft PT

BiliSoft™ Phototherapy System is the next generation LED fiber-optic based technology for treatment of indirect hyperbilirubinemia in newborns. Its increased surface area, high spectral irradiance, and long lasting blue narrow-band LED light are the features that are needed for intensive, efficacious phototherapy as recommended by AAP Guidelines. It supports and promotes developmental care, enables infant-parent bonding and provides healing light where it is needed – in Neonatal ICU, Pediatrics, Well Baby Nursery and at home.

Contact Us
Category:
Description
Features
• Healing light, right where it’s needed
• Mounting options
• Irradiance level*
• BiliSoft fiberoptic pad covers
• Easy positioning
• Double intensive phototherapy
Specification
Electrical specifications Input:
• 1.5 A @ 100 – 240 V,~ 50/60 Hz

Fuses:
• T3.15 A @ 250 V,~ slo-blo type (qty. 2)

Leakage current:
• < 300 μA @ 264 V~

Ground impedance:
• < 0.1 ohm from ground pin of the power inlet
module to any exposed metal surface

Storage requirements Temperature:
• -40°C to +70°C (-40°F to 158°F)

Humidity:
• 0% to 100% RH noncondensing

Atmospheric pressure:
• 50 kPa to 106 kPa

Environmental operating conditions Ambient temperature:
• +10°C to +35°C (50°F to 95°F)

Humidity:
• 10% to 90% RH non-condensing

Atmospheric pressure:
• 70 kPa to 106 kPa
• < 0.1 ohm from ground pin of the power inlet
module to any exposed metal surface

Physical specifications Light box (W x H x L):
• 16.5 x 21 x 16.5 cm

Light box weight (excluding fiberoptic pad):
• < 2.5 kg

Fiberoptic pad weight:
• < 1.1 kg

Fiberoptic light pad, small:
• 15 x 30 cm (light-emitting area)

Fiberoptic light pad, large:
• 25 x 30 cm (light-emitting area)

Fiberoptic cable length:
• 137 ± 5 cm

Performance specifications Spectral irradiance (bare fiberoptic pad):*
• Large fiberoptic pad – 49 μW•cm-2•nm-1
(+/- 25%) 9-point check
• Small fiberoptic pad – 70 μW•cm-2•nm-1
(+/- 25%) 6-point check

Wavelength:
• 430-490 nm (peak 440-460 nm)
LED Module estimated life:†

• Under continuous use, tested at room
temperature, a typical LED module will run for
approximately 8,000 to 10,000 hours before
the light intensity drops 25%

Sound level:
• < 44 dB(A) at 1 meter

X-ray:
• X-ray compatible

Regulatory standards IEC Type B equipment

IEC Class 1 (continuous operation)

FDA Class II

Product certified to the following standards:
• EN60601-1
• EN60601-1-2
• EN60601-2-50
• ISO 10993-5
• ISO 10993-10
• UL 60601-1
• CSA C22.2 No 601.1-M90
• IEC 60601-1-8
• BS EN 980
• 16CFR Part 1632.6 (for BiliSoft pad covers
and BiliSoft nests)